Electric road salt spreader, working width 4 metres, suitable for dry or wet salt, available in 80 and 120 litre capacities. Electric salt spreader for clearing snow from roads, salt extraction. It is placed at the rear of the vehicle (utility vehicle, quad bike, small lorry). Working width 4 metres (stainless steel auger and 4-metre spreading tray). Spreader operating speed between 5 and 15 km/h. Spreading tray and auger powered by two waterproof 12-volt electric motors. Adjustable salt/sand flow rate with a scale from 0 to 30. The salt spreader must be equipped with a control box. There are two models available: the standard box for start-up and the width adjustment box, which also allows the salt spreading width to be varied between 2 and 4 metres. The tray block can be adjusted to direct the spread to the right or left. Different types of hitches are available depending on the capacity of the hopper chosen: 3-point hitch, self-supporting on ball or trolley. We sell directly to farmers and are looking for resellers. Please contact us.